The working mode of moulding powder from annesheldon's blog

Moulding powder forms ”three layers”?in the crystallizer, powder layer, sintered layer and slag layer. This working mode is the key to play the role of moulding powder. The casting powder (1100~1200℃ melting point) on the surface of the molten steel (1500℃), heated by the molten steel and forms slag layer with 10-15mm thickness on the surface of molten steel. With the heat transfer slowed down, the moulding powder above slag layer sintered, forms sintered layer (900-600℃). And the casting powder above the sintered layer will gets fewer heat transfer, less than 500℃, so this is the powder layer. And the moulding powder covers in the molten steel surface evenly, to prevent cooling and secondary oxidation of molten steel. During casting, the slag film between crystallizer and solidified slab shell could reduce the casting resistance and improve the heat transfer of crystallizer. As casting going , the slag layer is consumed constantly, then sintered layer becomes slag layer, powder layer becomes sintered layer, and adds more moulding powder into the crystallizer, makes the moulding powder keeps “three layers“. Article Source: Moulding powder Company name: Henan Xinmi Changxing Refractory Materials Co.,Ltd Email: sales1@chinafirebrick.com Website:http://www.chinafirebrick.com/ Casting Powder

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment

Fatal error: Allowed memory size of 67108864 bytes exhausted (tried to allocate 69581897 bytes) in /home/shadowlancer/public_html/vchatter.com/ow_core/log.php on line 103